Expo 2020 - Dubai, UAE
scroll to down

BreadCrumb-en

guarantee image

Sangoma A102 Dual Voice and Data Card is an innovative launch by Sangoma, designed with two spans of optimized voice and data over T1, E1, and J1, available with Telco-grade hardware echo cancellation.

Part of Sangoma’s award-winning Advanced Flexible Telecommunications product line, the A102 uses the same high-performance PCI or PCI Express interface that is providing superior performance in critical systems all over the world.

Sangoma A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines.

Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma’s AFT family, Sangoma A102 is field upgradable with crash-proof firmware.

Choose Sangoma A102D and A102DE, equipped with world class DSP hardware to achieve carrier-gradeEcho Cancellation and Voice Quality Enhancement functions for your telephone systems.

 

  • Two T1/E1 spans with a single PCI or PCI-Express interface optimized for high performance voice and data applications
  • Support for Asterisk®, FreeSWITCH®, and Yate® as well as other Open Source and proprietary PBX, Switch,IVR, and VoIP gateway applications
  • 4-Year warranty

 

Hardware Structure of Sangoma A102 Card

Specifications

 

  •     Two T1/E1 spans with a single PCI or PCI-Express interface optimized for high performance voice and data applications
  •     Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other spans, so both T1 and E1 are supported simultaneously
  •     Support for Asterisk®, FreeSWITCH®, and Yate® as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications
  •     All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  •     Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis. Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers
  •     Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available
  •     Autosense compatibility with 5 V and 3.3 V PCI busses
  •     Line decoding: HDB3, AMI, B8ZS
  •     Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
  •     A102E and A102DE PCI Express: 1 Lane PCI Express bus
  •     Maximum operational power for PCI: 3.8 W (0.76 A @ 5 V) For PCI Express: 3.2 W (0.97 A @ 3.3 V)
  •     Temperature range: 0 – 50 °C
  •     32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention
  •     Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
  •     Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI
  •     T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
  •     Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
  •     Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
  •     WANPIPE® routing stack is completely independent of TDM voice application for total system reliability
  •     WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25
  •     Impedance: Configurable to 75ohms or 120ohms

Contact us:

Address: Office 109B, Dubai Tower
Baniyas Sq., Deira, Dubai, UAE.
Telephone:  +971 4 2277586
Mobile:  +971 54 4551689
All rights reserved for SENA Co.
scroll to top